The Zebra DS2200 Series of barcode scanners has a corded (DS2208) and a cordless (DS2278) model. Both models are compatible with 1D and 2D barcodes. To set them up and start scanning items, they require little to no assembly and simply need to be connected to a USB port on your computer.

Setting up the Zebra DS2208 barcode scanner (corded model)

To set up the Zebra DS2208 barcode scanner, you need the following:

• Barcode scanner
• USB cable
• Cradle (optional)

Then, to set it up:

1. Connect the USB cable to the base of your barcode scanner.

   

2. Connect the barcode scanner to a USB port on your computer. 
   
   Note: If you are connecting the scanner to a Mac and you see a Keyboard Setup Assistant pop-up, do not click continue. Click the red x in the upper left-hand corner to cancel the pop-up.  

   

3. Enable an automatic carriage return after a scan by scanning this barcode (also found in the Quick Start Guide packaged with your scanner):

   
   

   Note: If you have the Elo desktop bundle, skip this step. Your barcode scanner is already pre-configured for you.
4. In Retail POS, select Inventory > Item Search.
5. Scan an item. 

If the item you scan appears in your search results—congratulations! Your scanner is now officially set up. It should also work going forward (as long as it's connected to a computer that's powered on). You can also rest your barcode scanner in its cradle when you're not using it (if it's included in your bundle or you purchased one).

Setting up the Zebra DS2278 barcode scanner (cordless model with cradle)

The Zebra DS2208 barcode scanner communicates to its cradle via Bluetooth. This is what gives it its cordless functionality. Its cradle is then connected to a USB port on your computer so it can communicate with your Retail POS account and charge.

Before using the Zebra DS2278 barcode scanner in your shop, we recommend resting it in its cradle until it's fully charged. To indicate that it's charging, the cradle's LED light will turn amber and start blinking. Once it's fully charged, it will turn green and become solid. 

To set it up:

1. Connect the cradle cable to the port underneath the cradle.

   

2. Connect the cradle to a USB port on your computer.
   
   Note: If you are connecting the scanner to a Mac and you see a Keyboard Setup Assistant pop-up, do not click continue. Click the red x in the upper left-hand corner to cancel the pop-up.  

   

3. Enable an automatic carriage return after a scan by scanning this barcode (also found in the Quick Start Guide packaged with your scanner):
   

   

4. In Retail POS, click Inventory > Item Search.
5. Scan an item.

The item you scanned should appear in your search results.

Setting up the Zebra DS2278 barcode scanner (cordless model without cradle)

1. Connect the micro USB connector to your scanner and the standard USB port to your computer or a USB wall outlet. Note that this connector is for charging your scanner only. The LED light will be flashing green to indicate the scanner is charging.

2. Once charged, unplug your scanner from the Micro USB connector and scan the general discoverable mode barcode. This will allow your scanner to pair with your computer through Bluetooth. 
3. Make sure that Bluetooth is enabled on your computer. From the device list, click on your Zebra DS2278 model listed. This will pair your scanner to your computer. 

Setting up the 2D barcode scan 

To have the proper setup for your Zebra DS2200 series barcode scanner for 2D barcodes, follow these steps: 

1. Scan the Set factory default barcode

2. Scan the Disable keypad emulation barcode 

3. Enable the automatic carriage return after a scan by scanning this barcode