Hi. How can we help?

Setting up your Zebra label printer

Setting up your Zebra ZD410, ZD411, ZD420, or ZD421 label printer allows you to print labels for your items. The label printer connects directly to your computer with a LAN or USB cable. If the Zebra ZD410 or ZD411 model you have supports Bluetooth, you can also pair it to your iPad.

For label customization options, see Customizing labels with Lightspeed Hub and Setting up Zebra label printers for custom label printing

What you'll need

Supported label printers

One of these supported label printer models:

LAN

USB

Zebra ZD410

Retail - Label printer angled.png

USB

Zebra ZD411

Retail - Label printer - labels out.png

LAN

USB

Zebra ZD420 & Zebra ZD421

Retail - Label printer ZD421.png

Label printers accessories

Power cord and power supply

Retail - Label printer wires.png

LAN or USB cable

(for desktop setup)

Retail - LAN or USB cable.png

Label roll

(sold separately)

Retail - label roll.png

Setting up your label printer

  • Setting up your label printer on desktop

    1. Connect the power supply to the back of your label printer.

      Retail - Label printer back.png

    2. Connect the power cord to the power supply and an electrical outlet.

      Retail - Label printer power adapter.png

    3. Connect one end of the LAN or USB cable to your label printer.

      Retail - Label printer back - USB and LAN ports.png

    4. For LAN connections, connect the other end of the LAN cable to a LAN port on your router or wall. For USB connections, connect the other end of the USB cable to your computer.

      Retail - Label printer and laptop.png

    5. Turn on your label printer.

      Retail - Label printer front view.png

  • Setting up your label printer on iPad

    1. Connect the power supply to the back of your label printer.

      Retail - Label printer back.png

    2. Connect the power cord to the power supply and an electrical outlet.

      Retail - Label printer power adapter.png

    3. Turn on your label printer.

      Retail - Label printer front view.png

Inserting a label roll

Label rolls are purchased separately from your label printer.

To insert a label roll:

  1. Pull the yellow latches on both sides of the printer towards you and lift the lid open.
  2. Pull the yellow roll guides apart and insert the label roll with the labels facing upwards.
  3. Release the roll guides and push them together. Make sure the label roll is secure and turning freely.

    Retail - Label printer open.png

  4. Pull the labels out past the cutter at the front of the printer.
  5. Push the labels under the roll guides.

    Retail - Label printer open 2.png

  6. Flip the labels up and align the movable sensor to the center position.

    Retail - Label printer sensor.png

  7. Push the lid closed until both yellow latches snap shut.

    Retail - Label printer - labels out.png

If you're setting up the Zebra ZD421 label printer on your computer, make sure the yellow roll guides for your labels are not squeezing your label roll too tightly or your labels will not feed properly and risk getting damaged when you print.

Connecting your label printer

  • Connecting your label printer to Lightspeed Hub on desktop

    Lightspeed Hub is a desktop application that helps you to set up your hardware in fewer steps and guides you through the process. It also connects directly to Lightspeed Retail POS, bringing you a reliable hardware connection throughout your business day. To set up your label printer on your computer, first install Lightspeed Hub.

    1. Zebra ZD420 and ZD421 printers must be factory reset before connecting to Hub. For other models, skip to step 2.
      1. On your Zebra ZD420 or ZD421 printer, press the Power button to turn off your printer.
      2. Press and hold the Pause and Feed buttons while also pressing the Power button to turn on your printer.
      3. Hold the Pause and Feed buttons until the status indicator is the only indicator lit. Your Zebra ZD420 or ZD421 printer is now ready to connect to Hub.

        Retail - Label printer ZD421 factory reset.png

    2. On your computer, open Lightspeed Hub.
    3. Under Label printer, select Connect.

      You can only connect one label printer to Hub at a time. To connect a new printer, select Forget this device to disconnect the currently connected printer.

    4. Select Search for label printer. Your printer will display in the list as Ready. If not, make sure it's connected to your computer and a power source correctly.
    5. Select Connect next to your printer. If you're not sure which one is yours, find the serial number at the bottom of the printer and match it to the one listed in Hub.

    Your printer will now display as Ready in both Hub and Retail POS.

    Retail - print-menu-hub.png

  • Pairing your label printer to your iPad

    If the Zebra ZD410 or ZD411 model you have supports Bluetooth, you can pair it to your iPad and print labels from the Retail POS app.

    1. On your iPad, tap Settings > Bluetooth.
    2. In the Bluetooth panel, toggle on Bluetooth.
    3. Under OTHER DEVICES, tap your label printer. By default, its name is its serial number. You can find the serial number at the bottom of the printer.

      If your label printer isn't discoverable, enable Bluetooth Discovery and Pairing Mode. To do so, press the FEED button for five seconds. The label printer's LED light will start flashing on and off every second.

    Once the pairing process is complete, your label printer displays as Connected under MY DEVICES. Retail - iPad Label printer pairing.png

Calibrating your label printer

You need to calibrate your label printer for it to recognize the size of your labels and print them correctly.

  1. In Lightspeed Hub, select More actions > Calibrate label printer.

    Or, manually calibrate your label printer by holding down the Pause and Cancel buttons for two seconds, then release. You can also quickly press the Feed button (middle button) twice before printing.

  2. Your printer will measure and feed a few blank labels, indicating it's now calibrated.

Retail - Label printers - callibrate printer.png

You only need to recalibrate when you insert a new label roll of a different size. Otherwise, your printer will remember the settings from the initial calibration.

Printing labels

Once your printer is set up, test print a few labels to make sure they print as expected. Testing with a smaller amount of labels avoids waste should they print misaligned.

To print a queue of three test labels:

  1. In Retail POS, navigate to Inventory > Item Search.
  2. Select an item you want to print labels for.
  3. From the Details submenu, select Add Label. This starts a label queue. Retail - Label printers - test print.png
  4. In Inventory > Printer Labels, you'll see the item listed in the label queue.
  5. To the right of the item name, in the COPIES field, enter 3.
  6. To the left of the item name, select the printer icon. A print modal will open.
  7. Select the label size that matches your label roll:
    • Normal: 2.25 in x 1.25 in
    • Small: 1.25 in x 1.00 in
    • Alternative: 2.00 in x 1.00 in
    • Jewelry: 2.20 in x 0.50 in

    If you're not sure of the label size, select one from the dropdown to see an illustration in the modal you can match to your label roll.

    Retail - Label printer illustration.png

  8. Select Print. Your label printer should print three perfectly aligned labels.

What's next?

Installing Lightspeed Hub

Learn more about downloading Hub on your computer.

Learn more

Printing labels

Print from item search, POs, and transfers.

Learn more

Was this article helpful?

0 out of 1 found this helpful