The Zettle Reader is an EMV-enabled payment terminal that accepts chip and PIN and contactless debit and credit card payments, as well as mobile payments through Samsung Pay, Apple Pay and Google Pay. It connects to the Retail POS app and your iPad via Bluetooth.

Payment processing with the Zettle Miura M010 Terminal is only available to merchants in the United Kingdom and the Netherlands.

Initial setup

The Miura M010 is available for purchase through Zettle. Once you have created a business account through Zettle and have received your card reader, you can pair the reader to Retail POS.

To begin setup, the reader must be charged for a minimum of two hours.

Setting location and currency

To process payments with Zettle, the location of your Retail account needs to be set to the United Kingdom or the Netherlands and its currency set to GBP £ (pound sterling) or EUR € (euro).

1. Log in to Retail POS as an administrator using your username and password.
2. Navigate to Manager > Settings > General Options
3. Under Location Customization, select the following:
   • Location: United Kingdom or Netherlands
   • Currency: GBP £ or EUR €
4. Tap Save Changes.

Configuring the Zettle gateway

1. Log in to Retail POS as an administrator using your username and password.
2. From the Manager tab, tap Settings > Payment Processing.
3. Tap + Add Payment Gateway.
4. From the drop-down menu, select Zettle.

   

5. The options for the gateway will now display.
6. Under Assign a Name, enter a name for the gateway.
7. If you have a multi-store account, under Select Shops, select all locations that will use the gateway.
8. Tap Save.
9. Tap Done to return to the manager screen.

Adding the Miura M010 terminal to Retail POS via your iPad

Once the Zettle gateway has been configured, log in to your Zettle account and connect the Miura M010 terminal in Retail POS.

Adding the Miura M010 terminal to your iPad

Power on the terminal by pressing the power button on the top-right corner. Once the terminal is ready, the Bluetooth icon and the battery status indicators display and the terminal enters one of the following modes:

• FLASHING on-screen Bluetooth icon - Ready to pair
• SOLID on-screen Bluetooth icon - Ready to connect

• This mode indicates the terminal is not paired with any device. To pair a terminal in Ready to pair mode with your iPad:

  1. On your iPad, navigate to Settings > Bluetooth.
  2. Make sure the Zettle terminal is powered on and the on-screen Bluetooth icon is flashing. If the terminal has entered sleep mode, press any key to revive it.
  3. On the Bluetooth panel, tap the Miura M010 to begin the pairing process.

     

  4. Compare the number on your iPad to the one on the screen of your Zettle Reader.
  5. To confirm that the numbers match, press the blue checkmark button on the Miura M010 terminal.

  Depending on the version of your iPad, manual PIN pairing may be required. If you're prompted for a Bluetooth PIN during the pairing process, enter the last 6 digits of the terminal's serial number found on the back of the terminal.

• This mode indicates the terminal is currently paired with a device. In this mode, the terminal only allows connection to the device it's paired with and it's NOT discoverable by other Bluetooth devices. To pair a terminal in Ready to connect mode with your iPad:

  1. Press and hold the blue checkmark button on the Miura M010 terminal until the on-screen Bluetooth symbol displays on the terminal's screen and the Bluetooth icon begins flashing.
  2. On your iPad, navigate to Settings > Bluetooth.
  3. On the Bluetooth panel, tap the Miura M010 to begin the pairing process.

     

  4. Compare the number on your iPad to the one on the screen of your Zettle Reader.
  5. To confirm that the numbers match, press the blue checkmark button on the Miura M010 terminal.

  Depending on the version of your iPad, manual PIN pairing may be required. If you're prompted for a Bluetooth PIN during the pairing process, enter the last 6 digits of the terminal's serial number (which you'll find on the back of the terminal).

Adding the Miura M010 terminal to Retail POS

1. Log in to Retail POS as an administrator using your username and password.
2. From the Profile tab, tap payment terminal.
3. Enter your Zettle credentials and tap Log in.
4. Tap Card Readers.

Your Zettle Reader will now display insert card on its screen. You will now be able to check the reader’s battery level and version information in the card readers modal of the Retail POS app.

If a software update is available for your Zettle Reader, we recommend tapping Update card reader.

Processing a test transaction

Now that your Zettle Reader is connected to the Retail POS app, it's time to process a test transaction.

1. On the Profile screen, tap New Sale.
2. Tap + > Miscellaneous Charges.
3. In the Price field, enter 1.00.
4. Tap Add.
5. Tap Card.
6. Process the credit card on the Zettle Reader.
7. Tap Allow in the following alert:

   The Payment modal confirms that the payment is approved and closes automatically.

8. On the Credit Card screen, tap Finish Sale.

You're now ready to accept credit card payments from your customers with Zettle!

What's next?