Service Notification
Visit our Status Page for more details.
EN FR NL
Retail Help Center
RETAIL ECOMMERCE ONSITE RESTAURANT

    Pairing the Miura M010 to your iPad (iZettle payment processing)

    This article explains how to pair the Miura M010 terminal to your iPad for payment processing with iZettle.

    To pair the Miura M010 terminal with your iPad via Bluetooth:

    Power on the terminal by pressing the power button on the top-right corner. Once the terminal is ready, the Bluetooth icon and the battery status indicators display and the terminal enters one of the following modes:

    Ready to pair (flashing on-screen Bluetooth icon)

    This mode indicates the terminal is not paired with any device. To pair a terminal in Ready to pair mode with your iPad:

    1. On your iPad, open the Settings app.
    2. Tap Bluetooth.
    3. On the right-hand side, tap the Bluetooth slider to toggle it on (if it's off).
    4. Make sure the iZettle terminal is powered on and the on-screen Bluetooth icon is flashing. If the terminal has entered sleep mode, press any key to revive it.
    5. Wait a minute or two for your iPad to discover the terminal. Then, under OTHER DEVICES (on your iPad's Bluetooth screen), tap the iZettle entry (that appears there) to initiate paring.
    6. Both your iPad and the iZettle terminal display a random pairing number. Make sure the numbers on both devices match; then, tap PAIR on your iPad and press the blue check-mark key on the terminal to complete pairing.

    NOTE: Depending on the version of your iPad, manual PIN pairing may be required. If you're prompted for a Bluetooth PIN during the pairing process, enter the last 6 digits of the terminal's serial number (which you'll find on the back of the terminal).

    Ready to connect (solid Bluetooth icon)

    This mode indicates the terminal is currently paired with a device. In this mode, the terminal only allows connection to the device it's paired with and it's NOT discoverable by other Bluetooth devices. To pair a terminal in Ready to connect mode with your iPad:

    1. Press and hold the check-mark key on the iZettle terminal until the on-screen Bluetooth symbol displays on the terminal's screen and the Bluetooth icon begins flashing.
    2. On your iPad, open the Settings app.
    3. Tap Bluetooth.
    4. On the right-hand side, tap the Bluetooth slider to toggle it on (if it's off).
    5. Wait a minute or two for your iPad to discover the terminal. Then, under OTHER DEVICES, tap the iZettle entry (that appears there) to initiate paring.
    6. Both your iPad and the iZettle terminal display a random pairing number. Make sure the numbers on both devices match; then, tap PAIR on your iPad and press the blue check-mark key on the terminal to complete pairing.

    NOTE: Depending on the version of your iPad, manual PIN pairing may be required. If you're prompted for a Bluetooth PIN during the pairing process, enter the last 6 digits of the terminal's serial number (which you'll find on the back of the terminal).

    Once pairing is complete, click here for steps to set iZettle as the gateway in Retail POS and assign the Miura M010 to your iPad.