The Zebra ZD410 label printer connects directly to your Mac computer with a USB cable and allows you to print labels for your items.
Setting up your Zebra ZD410 involves the following steps:
- Connecting your printer
- Inserting a label roll
- Calibrating your printer
- Installing Zebra Browser Print
- Printing a label
What you'll need
To set up your label printer, you need the following from your hardware shipment:
Zebra ZD410 label printer | ![]() |
Power cord and power supply | ![]() |
USB cable | ![]() |
Label roll (sold separately) |
![]() |
1. Connect your label printer
To connect your label printer, you need the power cable, the power adapter and the USB cable.
- Connect the power supply to the back of your label printer.
- Connect the power cord to the power supply and an electrical outlet.
- Connect one end of the USB cable to your label printer.
- Connect the other end of the USB cable to your computer.
- Turn on your label printer.
2. Insert a label roll
Label rolls are purchased separately from your label printer. To insert a label roll:
- Pull the yellow latches on both sides of the printer towards you and lift the printer's lid open.
- Pull the yellow roll guides apart and insert the label roll with the labels facing upwards.
- Release the roll guides and push them together. Make sure the label roll is secure and turning freely.
- Pull the labels out past the cutter at the front of the printer.
- Push the labels under the roll guides.
- Flip the labels up and align the movable sensor to the center position.
- Push the lid closed until both yellow latches snap shut.
3. Calibrate your printer
For your label printer to recognize the size of your labels, you need to calibrate it. This will make sure that your labels will print correctly. To do so, hold down the pause and cancel buttons for two seconds and release. The printer will measure and feed a few blank labels.
4. Install Zebra Browser Print
To make sure your labels print correctly from your browser, you first need to enable Zebra Browser Print in your shop(s). To do so:
- Sign in to Retail POS on Firefox or Google Chrome.
- From the main menu, tap Settings > Locations.
- Next to the name of your shop, click Customize.
- From the Settings submenu, under Product Labels, make sure the Enable Zebra Browser Print checkbox is selected.
- If you have multiple locations, you can use the arrows at the top right-hand corner of the page to quickly cycle through your shops and enable Zebra Browser Print in your other locations.
Now that you've enabled Zebra Browser Printer in your shop(s), you also need to:
- Install the Zebra Browser Print application on your computer
- Accept a security certificate on your browser
The steps involved depend on if you're using Google Chrome or Firefox.
-
Google Chrome
- From the main menu, click Inventory > Item Search.
- Click an item you want to print labels for.
- Under the top bar, click the grey Print Label button.
- From the Zebra Browser Print modal, click Install Zebra Browser Print. A Your connection is not private page will load. This is expected.
- Click Advanced.
- Click Proceed to downloads.lightspeedretailapp.com (unsafe). A BrowserPrint-1.2.0.dmg file will start downloading at the bottom-left of your browser window.
- Open the BrowserPrint-1.2.0.dmg file.
- On the alert on your computer, click Open. A window with the Zebra Browser Print application will open on your computer.
- Click and hold to drag and drop the Zebra Browser Print application to your Applications folder.
- Open the Zebra Browser Print application.
- Read the Browser Print End User License Agreement and click I Agree.
- On the Browser Print Security Certificate alert, click OK. A Your connection is not private page will open in a new tab on your computer's default browser (Google Chrome). This is expected.
Note: If your computer's default browser is not Google Chrome, copy and paste the URL into a new tab on Google Chrome.
- On the Your connection is not private page, click Advanced.
-
Click Proceed to localhost (unsafe).
- On the Select an Option alert, click Yes.
You should now see the below message on Google Chrome, indicating that you've successfully accepted the security certificate you need to print labels on your browser with Zebra Browser Print.
You should also see that you've successfully installed and opened the Zebra Browser Print application on your computer's menu bar.
-
Firefox
- From the main menu, click Inventory > Item Search.
- Click an item.
- From the Details submenu, click Print Label.
- From the Zebra Browser Print modal, click Install Zebra Browser Print. A Warning: Potential Security Risk Ahead page will load. This is expected.
- Click Advanced.
- Click Accept the Risk and Continue.
- On the new alert, select Open with DiskImageMounter and click OK.
- On the alert on your computer, click Open. A window with the Zebra Browser Print application will open on your computer.
- Click and hold to drag and drop the Zebra Browser Print application to your Applications folder.
- Open the Zebra Browser Print application.
- Read the Browser Print End User License Agreement and click I Agree.
- On the Browser Print Security Certificate alert, click OK. A Warning: Potential Security Risk Ahead page will open in a new tab on your computer's default browser (Firefox). This is expected.
Note: If your computer's default browser is not Firefox, copy and paste the URL into a new tab on Firefox.
- On the Warning: Potential Security Risk Ahead page, click Advanced.
-
Click Accept the Risk and Continue.
- On the Select an Option alert, click Yes.
You should now see the below message on Firefox, indicating that you've successfully accepted the security certificate you need to print labels on your browser with Zebra Browser Print.
You should also see that you've successfully installed and opened the Zebra Browser Print application on your computer's menu bar.
5. Print labels
Now that you've connected your printer, calibrated it and installed Zebra Browser Print, print three labels to test if your printer is working as it should. We recommend printing three labels before printing a larger label queue to avoid wasting labels should they print misaligned.
To print labels:
- From the main menu, click Inventory > Item Search.
- Click an item you want to print labels for.
- From the Details submenu, click Print Label.
- From the print modal, select your printer.
Note: Your printer's name is based on its serial number. If you don't know your printer's serial number, check the sticker underneath your printer.
- Select the label size that matches your label roll.
Normal Small Alternative Jewelry 2.25 in x 1.25 in 1.25 in x 1.00 in 2.00 in x 1.00 in 2.20 in x 0.50 in Note: If you're not sure of the size of your label roll, you can also select a label size from the drop-down. The illustration in the modal will reflect the appearance of the label size you selected. This way, you can match your selection in the modal to your label roll. - Enter a quantity of 3.
- Click Print.
Your label printer should print three perfectly aligned labels.
What's next?
Learn the many ways that you can print labels from your Retail POS account.