For a more polished look when you charge your iPad or print receipts to a USB-compatible receipt printer, you can route a Lightning to USB cable through the Vault Pro iPad stand. To do so:
- Lay down the stand with the iPad screen facing towards the right and the base of the stand towards the left.
- Lift the base of the wire management cover upwards and towards the right.
- Place the stand with the iPad screen facing down and its base towards the right.
- Remove the wire management cover from the mounting plate by pulling it towards the right.
- Connect the Lightning to USB cable to the charging port of your iPad.
- Route the Lightning to USB cable through the opening on the side of the wire management cover. Then, center the cable through the top opening of the cover.
- Install the wire management cover back onto the mounting plate by pushing it towards the left.
- Lay down the stand with the iPad screen facing towards the right and the base of the stand towards the left again.
- Connect the bottom wire management cover to the top wire management cover.
- Route the Lightning to USB cable through the opening on the side of the bottom cover. Optionally, if your countertop has a hole for wire management, you can route the cable through the bottom of the base instead.
- Push down on the bottom wire management cover until it snaps into place.
The Lightning to USB cable is now successfully routed through your Vault Pro iPad stand.